Belt cleanerClassification : Primary belt cleaner , secondery belt cleaner , V-plow belt cleaner
Usage: The Belt cleaner can effectively clean the surface of the drum and the bottom of the conveyor belt adhesion, with the conveyor belt to prevent deviation, extend the service life of conveyor belts and accessories to prevent accidents and so on.
Belt Conveyor During the conveyance of the material, if the residual material enters the drum or the roller bearing seat, the bearing wear will be accelerated and the material on the drum or idler surface will tear and pull the conveyor belt to accelerate the wear of the conveyor belt and destruction. If the material in the belt conveyor to the drum or vertical tensioning roller surface adhesion and agglomeration will cause the conveyor belt deviation, increase the conveyor belt wear, and even tear drum package layer and other serious consequences. If the cleaning effect is good, the service life of the roller, conveyor belt and drum can be extended. Therefore, the cleaning ability of the belt cleaner has the advantages of improving the operation efficiency and reliability of the belt conveyor, reducing the equipment failure rate and reducing the maintenance cost. Play a pivotal role.
Scraper with polyurethane composite materials, the use of one mold plus sulfur forming, scraper surface formation, good straightness, low friction, high wear resistance, high strength, with a stable scraping effect. Can effectively remove the residual belt on the fine particles, wet sticky material. The preloaded pressure regulator ensures a stable contact pressure between the scraper and the belt. Scraper surface by a number of narrow polyurethane scraper composition, with empty buffer hole, a variety of belts have a good follow.
Primary Belt Cleaner:
The scraper is more flexible when the belt is worn out by the material thus showing uneven form, and the scraper still can be tightly fit the belt on the head pulley through irregular rotation to generate the complete effect of scraing.
The modular design ensures the blades to be assembled and fixed without use any screws, maintenance and replacement easily and quickly, especially maintaining the flatness and straightness of the blade tips.
Secondary Belt Cleaner:
The secondary cleaner with rubber or tungsten carbide one piece cleaning blade. In fact, the cleaner run flow are usually centralized on the belt and easily worn out and generate the gap between belt and belt leaner. With unique arm-mounting apparatus, the belt cleaner can be completed fitted with belt and clean efficiently.
V-Plough Conveyor Belt Cleaner
Polyurethane cleaner is installed on the surface of discharge pulley, with scraper pressing the belt at certain angle and pressure. As the first stage of multistage cleaning system, the primary polyurethane cleaner can clear alway most of the sticky material on the belt. Unique design of this kind of belt cleaner can provide simple installation and maintenance and low cost, prolong belt service life.
1.The polyurethane blade is replaceable / removable
2.Easy installation and maintenance
4. Prolong the service life of conveyor belt
The cleaning capacity of the sweepers plays a decisive role in improving the operating efficiency, reliability, equipment failure rate and maintenance cost of belt conveyors. The cleaning device can effectively clean the surface of the drum and the bottom of the conveyor belt adhesion, with the conveyor belt to prevent deviation, extend the service life of conveyor belts and accessories to prevent accidents and so on.